As more senior living operators work to increase efficiencies and leave a smaller environmental footprint, on-premise laundry operations are being put under increased scrutiny.
With labor accounting for more than half of the laundry budget and laundry equipment consuming significant energy, water and other precious resources, finding ways to do more with less — and with better outcomes — makes good business sense.
Swapping outdated washer-extractors and dryers for more sophisticated, efficient models is a high-impact strategy worth considering. Although these capital equipment purchases can initially put a dent in the budget, they also can quickly pay for themselves in increased throughput and a reduction in resource consumption, Practice Green Health reports. Washers built before 2003 are a prime example. According to the Environmental Protection Agency, which created the ENERGY STAR international standard for energy-efficient consumer products, older washers are significantly less efficient than newer models.
“ENERGY STAR-certified washers use roughly one-third less energy and 40 percent less water than regular models,” the EPA notes.
Of course, dryers, extractors, chemicals and staff practices also factor heavily into overall efficiencies and a facility’s environmental impact. These days, the market is brimming with innovative solutions that make it easier than ever for staff to improve laundry operations, without taking a toll on the environment or bottom line.
Cycle right
Incorrect cycle selection is one of the biggest and most costly mistakes laundry operators make, experts say.
“Lightly soiled linens, for example, typically don’t require the same wash program or treatment as heavily soiled linens. If staff are running the same cycles for all loads, that means wasted water, energy and chemicals,” explains Bill Brooks, UniMac North American sales manager.
Today’s advanced washer-extractors feature dozens of wash cycles — as many as 30 water levels and temperature choices — he pointed out. But if programmable features aren’t being used effectively, they’re a wasted benefit. Brooks recommends long-term care facilities work with their equipment distributors and chemical representatives to pre-program the wash cycles and chemical usage based on the most popular loads and health regulations.
“Then, selecting the correct option is as easy as staff touching a button and pressing start,” he says.
Brooks recommends facilities without an advanced washer-extractor with flexible programmable options familiarize themselves with typical loads, and which cycles and chemicals those loads typically require to ensure that resources are used wisely.
Water is a dwindling and costly resource, yet experts say many facilities unknowingly use too much. Laundry operators nationwide should adjust their washers’ water levels and, if possible, program their machines to ensure that fill levels aren’t set too high, and that chemicals aren’t wasted when too much water is in the cylinder.
Proper water level programming can save thousands of gallons of water over the course of one month, says Dan Goldman, OPL national sales manager for Laundrylux.
At the same time, operators should avoid under-filling their machines, an all-too-common problem that’s not only costly and wasteful, but can impact the washer’s performance and lead to premature breakdown of both linen and the equipment itself.
“Under-loading occurs seventy percent of the time, especially when the operator doesn’t weigh the loads prior to processing,” Goldman says. Electrolux’s latest washers weigh laundry and automatically adjust water levels according to poundage.
Facilities using front-loading washer-extractors without the latest high-tech features can follow this advice from Gary Gauthier, regional sales manager for Milnor Laundry Systems: Fill the machine until there’s a football-shaped and football-sized space at the top of the basket.
“Some people worry that putting too much into a washer is bad for the machine or that the goods won’t get clean,” he says. “In fact, under-loading is much worse on front-loaders because this can cause out-of-balance extracts that will prematurely damage bearings and the machine’s frame.”
Get the formula
Cleaning chemistries should also be carefully evaluated for their efficacy and environmental impact, sources agree. Sunrise Senior Living has seen a big ecological and economical impact by using a solid chemical system.
“By using solids, we’re able to mix with water on site and help reduce the gasoline that would have been used to deliver gallons of water-based chemical product,” notes Andy Coelho, SVP of facilities at Sunrise.
A number of cold-water chemistries that can clean textiles effectively with less heated water are also on the market. Energy use is often most impacted by water temperature, stresses Gauthier, so it’s important to consult with the laundry chemical supplier to ensure that appropriate water temperatures are being used.
Another piece of expert advice: Don’t overuse high efficiency detergents. As Dan Hayes, president of Creative Laundry Systems Inc., explains, HE detergents, which capture and hold dirt particles away from fabric, so they can be rinsed away cleanly, are designed for use in low-water environments.
“Using too much detergent is like using too much shampoo and not rinsing it all out,” he says, adding that too much detergent leaves fabric stiff and scratchy. To release detergent residue, he suggests washing with a half cup of white vinegar instead of detergent. “If you do this with towels, you’ll feel how soft they are without soap when the residual soap is gone.”
Excess detergent also can interfere with sensors in the machine that monitor the balance of the load, Hayes cautions, and can clog drains and plumbing. What’s more, excess bubbles build up in the cabinet and drum, and can reach the main bearings that ease the drum’s spin.
“Once the bearings fail due to soap build-up, you have to buy a new machine,” he warns.
Heating up the savings
Another simple way to shave waste is to nix over-drying. Excessive dry cycles drain time and energy, and also break down textiles, resulting in higher replacement costs. Bypassing set drying times on the tumbler is a common mistake seen in almost every laundry room, according to Goldman. n
